Facilities

Note:

Program Notes

STEP1: Find a 3D model (.STL. file)
*Design on Tinkercad, or find a model on a website like Thingiverse.com.
*Download the STL. onto a library computer or if you are using your own computer, onto a flash drive.
STEP 2: Slice it
* Open Dremel Digilab 3D slicer on a library computer.
*Open your STL
* Adjust size & settings as needed - if this is your first time using the printer, a librarian can walk you through the software.
*Click "Prepare"
* Check estimated time - print time MUST be less than 6 hours. Long prints will need to be started in the morning.
* DISCUSS PROJECT WITH LIBRARY STAFF. PRINT TIME MUST BE LESS THAN 6 HOURS AND WEAPONS/EXPLICIT MODELS WILL NOT BE PRINTED.
* Save the GCODE onto a flash drive.
* Make an appointment for your print. You can do this when you clear your model with staff or online at www.wstx.us/rec. ( if the printer is not in use and time allows, you may be able to print your model right away)
* Print schedule will be first come first serve
STEP 3: Print
* At your appointed time, bring your flash drive to the front desk. Tell us the file name and what filament color you want.
* Library staff will operate the printer
* You do not need to stay at the library while your item is printing, if you need to leave we will call you when printing is finished.

Patrons MUST have a library card in good standing to use MakerLab equipment.
The first time you use the equipment, you will need to read and sign the MakerLab Usage Policy, the Equipment Reservation Policy and the MakerLab Usage Waiver.
Please check in at the front desk at your scheduled time.